English
Français
Deutsch
Português
Español
русский 
한국어
العربية
Italiano
Indonesia
Schweiz
Polski
Nederlands
ישראל - עברית
Perzisch
ไทย
日本語
ኢትዮ-አማርኛ
Việt Nam
Kiswahili
Srpski
Ελληνικά
繁體中文Product
- ebmpapst
- ZIEHL-ABEGG
- DELTA
- SUNON
- Rosenberg
- SODECA
- FULLTECH
- Nicotra Gebhardt
- S&P
- Wistro
- San Ace
- SANMU
- ADDA
- NMB-MAT
- WEIGUANG
-
HVAC Controls & Components
-
Sanhua
4 Way Reversing Vavle Electronic Expansion Valve Driver Electronic Expansion Valve Electronic Shut-off Valve Ball Valve Electronic Expansion Valve Controller Refrigerated Cabinet Controller Pressure Transducer Solenoid Valve Thermostatic Expansion Valve Pressure Control Check Valve Sight Glass Pressure Regulator Liquid Injector Brass Service Valve Charge Valve Filter Drier Drain Pump Accumulator Liquid Receiver Oil Separator
-
Fengshen
Pressure Control Differential Pressure Control Temperature Control Flow Switch Pressure Controlled Water Valve Evaporation Pressure Regulating Valve Temperature Controlled Water Valve Solenoid Valve Thermostatic Expansion Valve Temperature Responsive Expansion Valve Constant Pressure Expansion Valve (Hot Gas Bypass) Pilot and Main Valve Forerunner Pressure Regulating Valve Sight Glass
- Magic
- Sonyo
- CAREL
- Tecumseh
- Danfoss
- Emerson
-
Sanhua
- HVAC Terminal Units
- Multifan
- Accessories
KJF Series - Tunnel Jet Fan
Nominal data
Description
Quick Facts
• Size from 560 to 1600 mm diameter
• Thrust Force Up to 3000 N
• Thrust Efficiency Up to 37 N/kW
• Unidirectional and 100% Truly Reversible
• Casings are Steel Hot Dip Galvanized as per ASTM A123
• Blades are X-Ray Test as per ASTM E155
• Performance Tested as per AMCA 250 and 300
• High Temperature Certified by TUV SUD as per EN 12101
Casing
Tube casing is produced in high grade carbon steel with thickness 4 mm or more suitable to be used in tunnel / underground environment.
Blades
Specially designed aluminium alloy homogenous aerofoil blades with high yield strength cater for high thrust and thermal shock in case of fire.
Structural Supports
Fan supports are made of high strength steel to withstand static and dynamic load during fans are operating.
Finishing
All steel parts are finished by hot dipped galvanized for corrosion resistance and withstand high temperature.
